Expert Answers about RV Speakers

• Replacement Drive Head Cover for Solera Powered Awnings
• Thanks for the information. I checked with Lippert and didn't get anything back on the first two numbers and the last one is a fire safety code. The good thing is there aren't many options for replacement motor covers for Solera awnings. I have listed the ones we have below along with a picture to help identify them: Black - Regal Drive Head - Replacement Front Cover for Solera Power RV Awnings item # LC643922 Black - Plain Drive Head - Replacement Front Cover for Solera Power RV Awnings...
  view full answer...


• Dimensions of the Mounting Bolt Holes for the Furrion RV Outdoor Speaker # FMS5B
• I went out to the warehouse and took some measurements of the Furrion RV Outdoor Speaker # FMS5B. The inner diameter that you mentioned is 5" while the bolt holes measure 5-1/2" diagonally and 3-7/8" across from each other, as you can see in the attached picture.
  view full answer...


• What is the Measurement of the Way Interglobal Speaker without the Trim Ring.
• The overall diameter of the Indoor RV Speaker part # 324-000001 is 6.5" with the trim ring installed and 6.25" with it removed. The trim ring adds right at 1/8" all the way around. The speaker is designed to fit cutout holes that are 5" in diameter so the flange will sit on solid material to be attached to. Then where possible the trim ring is reinstalled to cover up the attachment points. Check out the linked video to see some more specifics on it.
  view full answer...


• Recommended Replacement For Jensen ML6-HW01 RV Speakers
• The Jensen Marine Speakers # MS5006WR has an edge to edge diameter (including the grill) of 6" and the mounting hole center to center distance is 3-3/4". If you're wanting to reuse the old mounting holes then you would want the Jensen Marine Speakers # MS6007WR instead since they have the same 4-1/2" spacing. They have an overall diameter of 7-1/8" so they'll match up nicely with your current speakers.
  view full answer...


• Watts Per Channel for the Furrion RV Stereo # DV3300
• I confirmed with Furrion that the output of the Furrion RV Stereo # DV3300 is 40 watts by 4 channels. I found on their site where they have it listed incorrectly but also found a more official spec sheet for it that lists 40 watts per channel which is very standard for vehicle stereos like this.
  view full answer...


• What Size Cutout Is Needed For Furrion 2-Zone Sound Bar
• While I wasn't able to get an exact cutout dimensional sheet from Furrion, I was able to find some dimensions that you can use to get an idea of what kind of cutout you need (see attached). The Furrion RV Sound bar w/ USB Charge # FSB2N25MCBL mounts flush to the wall so the cutout only needs to accommodate the back part of the stereo and the speakers. The stereo measures 10-15/16" wide x 2-3/8" deep and then the outermost speakers are 25-7/8" apart on center. You'll want your cutout to...
  view full answer...